Skip to content

Interconnect & Electromechanical

Headers, Sockets & Board-to-Board Connectors

Pin headers, female sockets, box headers, FPC connectors and fine-pitch board-to-board pairs from 0.4 mm to 5.08 mm pitch.

Specifying Headers / Board-to-Board without a costly substitution

Connectors are mechanical parts that happen to be electrical, so the datasheet half that matters is the mating cycle rating, contact plating and the tolerance stack of the pair. A 1.27 mm header and its socket from different suppliers may mate on the bench and fail vibration, because their combined float range does not overlap under load.

We quote by pitch, pin count, row configuration, plating (gold flash versus selective gold), mounting style and mating height. For fine-pitch board-to-board pairs we quote both halves together, since mixing suppliers across a pair is the usual source of intermittent contact.

Commodity 2.54 mm headers and sockets are genuinely stock items, available by the box. Fine-pitch and high-density pairs are thinner in the market and are often tied to a specific family. We will say which half is available separately and which only comes as a matched pair.

Typical specifications

Ranges we routinely source in this category. They describe the window, not a single part — the exact value is fixed by the datasheet you specify.

ParameterRange we source
Pitch0.4, 0.5, 0.8, 1.0, 1.25, 1.27, 2.0, 2.54, 5.08 mm
ConfigurationSingle/double row, straight/right angle, SMD/THT
Positions2 – 100 pins
PlatingGold flash, selective gold, tin; 0.76 µm and 1.27 µm gold options
Mating cycles25 – 500, series dependent
Current0.5 A – 5 A per contact

Where it is used

Typical applications we quote for. If your use case needs a tighter parameter than the list suggests, say so at quotation — it changes which suppliers are viable.

  • Board stacking and mezzanine
  • Display and camera FPC connections
  • Wire-to-board interfaces
  • Test and programming headers
  • Module and daughterboard mating
Sourcing note. Availability, lead time and price are confirmed per line item at quotation. This page describes the range we can source — it is not a stock guarantee.

Part numbers on the desk

Specific parts we have looked at recently. Availability is re-confirmed at quotation; the note is what we saw, not a reservation.

Sample data. Sample entries: these rows show the format of the desk while live records are being entered. Availability is illustrative and always re-confirmed at quotation.
Part number Brand Package MOQ Availability
PZ254-2-10-WS Generic 2.54 mm 2×10 straight 500 pcs Seen in market

Questions buyers ask about Headers / Board-to-Board

Can I buy only the male half?

For commodity headers yes. For fine-pitch pairs we recommend buying both halves from one family — mixing suppliers is the most common cause of intermittent contact.

What plating should I choose?

Gold flash for benign indoor use, selective gold for repeated mating or harsh environments. Tin is cheapest and oxidises; we quote the plating rather than leaving it to the seller's default.

Do you supply custom pin counts?

Common counts are stock; unusual counts are often factory-order with a minimum. Send the count and the annual volume and we will say which it is.

More in Interconnect & Electromechanical

Next step

Send the part number. We will check the booths.

One line or a full BOM — the answer comes back per line, with the market position stated rather than implied.