Terms of sale
Last updated: 20 November 2026 · Version 2.0
These terms govern quotations, orders and deliveries from the sourcing desk trading as Yulu360 (“we”, “us”) to the business placing the order (“you”, “the Buyer”). They apply to every quote issued and every order accepted from this website, by email, or through WhatsApp, Telegram or X. Read them before you order; if you cannot accept any part, tell us before the order is confirmed.
We sell to businesses only. If you are buying as a consumer, tell us before ordering. Nothing in these terms removes a right that mandatory consumer protection law gives you in your country of residence.
1. Who we are
Yulu360 is the trading name used by the component sourcing desk based in the Huaqiangbei electronics market, Futian District, Shenzhen, Guangdong, China. Business licence details and the registered entity name are available on request before an order is placed. Contact: chao.open@gmail.com · +86 132 6709 1606.
2. Quotations
- A quotation is an invitation to order, not a binding offer, until we confirm the order in writing.
- Each quote states how long it stays valid. On fast-moving lines that can be a single day, because the market moves; when a quote expires we re-check availability rather than assume the old terms.
- Prices, quantities, date codes and lead times are confirmed per line item. A quote for a BOM is not a guarantee that every line can be supplied.
- Nothing on this website — including category pages, stock signals and sample listings — is a stock guarantee, a price commitment, or an offer capable of acceptance.
- Obvious errors in a quote (a misplaced decimal, a unit mismatch) do not bind us; we will point the error out and reissue.
3. Orders
An order becomes binding when we confirm it in writing — by email acknowledgement, a signed proforma invoice, or an explicit message accepting your purchase order. The confirmation states the part numbers, manufacturer, quantity, packaging, price, Incoterm and estimated delivery. If your purchase order contains terms that conflict with these terms, our written confirmation prevails unless we have accepted your terms specifically and in writing.
We may decline an order, or cancel before shipment, where the parts cannot be sourced as specified, where the order would breach export control or sanctions law, or where we suspect fraud or a counterfeit enquiry.
4. Specifications, substitutions and markings
- Goods are supplied against the specification in the confirmed order. Manufacturer, package, tolerance, voltage rating, temperature grade and date code are part of that specification.
- Substitutions are made only with your written approval. If a specified part cannot be sourced, we propose an alternative with the differences spelled out; you may accept it, reject it, or cancel that line.
- Date codes and country of origin are recorded as found in the market and passed on before shipping. If a minimum date code matters to you, state it in the order — it changes which suppliers are viable.
- We do not supply used, pulled, refurbished or re-marked components, and we do not relabel or repackage goods.
- Where a datasheet link is provided, it is the manufacturer’s document, reproduced for reference. It is not a warranty that the part meets every parameter in it for your application.
5. Price, tax and payment
- Prices are in the currency stated on the quote, usually USD or EUR, and exclude any import duty, VAT, or local tax payable in the destination country.
- Payment is by bank transfer to the account on the invoice, on the terms stated there. Production, consolidation or dispatch begins when the agreed advance has cleared.
- Bank charges levied by the sending or intermediary bank are for the Buyer’s account, so the amount received must match the invoice.
- Ownership of the Goods passes only when we have received payment in full. Risk passes as set out in clause 6.
- Late payment may incur interest at 1.5% per month or the maximum permitted by applicable law, whichever is lower, and we may suspend outstanding shipments until the account is settled.
6. Delivery, risk and Incoterms
- Delivery is made on the Incoterm stated on the invoice, interpreted under Incoterms® 2020. If no Incoterm is stated, the default is EXW Shenzhen.
- Risk passes to the Buyer at the point defined by that Incoterm. From that point, loss or damage in transit is a matter between the Buyer and its carrier or insurer.
- Lead times are estimates given in good faith and are not guaranteed dates unless we have expressly confirmed a fixed delivery date in writing.
- Where an order spans several categories, we consolidate it into one shipment by default. Consolidation can add a few days and saves freight; tell us if you need partial shipments instead.
- Export documentation — commercial invoice, packing list, and certificates where applicable — is prepared by us. Import licences, customs clearance and destination compliance are the Buyer’s responsibility.
7. Inspection and claims
- We inspect goods before dispatch: quantity against the order, packaging condition, markings, and where agreed, sample testing or laboratory verification.
- Visible shortage or damage must be reported within 7 days of delivery, with photographs of the packaging and the labels.
- Latent non-conformity — a wrong part, a wrong date code, a failed parameter — must be reported within 30 days of discovery and in any event before the Goods are used, resold or incorporated.
- Claims are handled against the batch and date code recorded at dispatch. Keep the original packaging and any unused quantity until the claim is closed.
- Inspection reports describe the tests performed and the sample size. They are a record of what was checked, not a guarantee of field lifetime or fitness for a particular application.
8. Returns
Do not ship anything back before we issue a return authorisation. Unauthorised returns cannot be traced, are refused at the door, and remain the Buyer’s property and risk. Once authorised, we confirm the return address, the reference number and who pays the freight — normally us if the fault is ours.
9. Warranty and remedies
We warrant that the Goods conform to the confirmed specification at the time of delivery. Any additional warranty period is stated on the quotation or invoice; if no period is stated, the statutory conformity obligation applicable to the contract applies.
If Goods do not conform, and the claim is made within the periods in clause 7, we will at our option repair, replace, or credit the affected quantity. This is the Buyer’s exclusive remedy for non-conformity. The warranty does not cover damage caused by the Buyer’s handling, storage, soldering or testing outside the manufacturer’s published conditions, nor parts used outside their datasheet limits, nor normal wear.
10. Counterfeit and quality policy
If any part we supplied is verified by an independent laboratory, or by the original manufacturer, to be counterfeit or mislabelled, we will replace it with genuine stock or refund the purchase price in full, and reimburse the reasonable cost of the verification. Report the finding with the laboratory report or the manufacturer’s statement; we will not dispute a properly evidenced result.
11. Export control, sanctions and end use
- The Buyer confirms that the Goods are not intended for use in the development, production or stockpiling of weapons of mass destruction, nor for any military end use prohibited by applicable law.
- Where an item is export-controlled or dual-use, we tell you before shipping. Obtaining any required export or import licence is the Buyer’s responsibility unless we expressly agree otherwise in writing.
- The Buyer confirms it is not subject to sanctions, is not owned or controlled by a sanctioned party, and will not re-export the Goods in breach of applicable export control or sanctions rules.
- We may decline or cancel an order where supplying it would breach these rules.
12. Intellectual property
Manufacturer names, part numbers and trademarks belong to their owners and are used only to identify the goods. Nothing in these terms transfers any licence in them. Drawings, test reports and documents we produce remain ours, and are supplied for the Buyer’s internal use with the order they relate to.
13. Confidentiality
BOMs, drawings, target prices and end-customer names you send us are treated as confidential commercial information. We use them only to quote and supply, and we disclose them only to the people and suppliers who need them to do that. We will sign your NDA where you send one; review it before any file is shared. This obligation does not cover information that is public, already known to us independently, or required to be disclosed by law.
14. Limitation of liability
To the extent permitted by law, our total liability arising out of or in connection with an order — whether in contract, tort, or otherwise — is limited to the amount the Buyer paid for that order. We are not liable for loss of profit, loss of production, loss of contracts, or any indirect or consequential loss.
Nothing in these terms excludes or limits liability that cannot lawfully be excluded, including liability for death or personal injury caused by negligence, for fraud, or for any mandatory statutory right.
15. Force majeure
Neither party is liable for a delay or failure caused by an event beyond its reasonable control: natural disaster, epidemic, war, civil unrest, government action, port or customs closure, sanctions, widespread power or network failure, or the failure of a carrier or supplier for reasons outside our control. The affected party notifies the other promptly. If the event continues for more than 60 days, either party may cancel the affected order and refund amounts paid for Goods not delivered.
16. Anti-bribery
We do not offer or accept bribes, facilitation payments or improper inducements, and we expect the same from the Buyers we deal with. We may decline an order, or end a relationship, where that expectation is not met.
17. Termination
Either party may terminate an order immediately if the other becomes insolvent, commits a material breach and does not remedy it within 14 days of notice, or engages in conduct that would make continuing unlawful or unsafe. Termination does not affect rights that already accrued, including payment for Goods delivered.
18. Governing law and disputes
These terms and any contract formed under them are governed by the laws of the People’s Republic of China, excluding its conflict-of-law rules and the UN Convention on Contracts for the International Sale of Goods.
Disputes are submitted to the competent court in Shenzhen, unless the confirmed order names another forum. Before starting proceedings, both parties agree to try to resolve the matter in writing for 30 days — in practice, most disputes about a batch are settled by a laboratory test and a credit note. If you require arbitration instead, say so before the order is confirmed and we will agree the seat and rules in the order.
Nothing in this clause deprives a consumer of the protection of mandatory rules in their country of residence, or prevents either party from seeking interim relief to protect its position.
19. Notices
Notices are valid if sent by email to the address on the confirmed order or, for us, to chao.open@gmail.com. A notice is treated as received on the next working day in Shenzhen. Material changes to an order need written confirmation from both sides; a WhatsApp message from an authorised contact counts as written.
20. General
- These terms, together with the confirmed order and any signed NDA, form the entire agreement and replace earlier discussions.
- If a clause is found unenforceable, the rest remains in force and the clause is read down to the minimum extent necessary.
- Neither party may assign an order without the other’s written consent, except to a successor of the whole business.
- Failure to enforce a clause once is not a waiver of it.
- These terms are drawn in English. If translated, the English version prevails.
21. Questions
If anything here is unclear, ask before ordering: chao.open@gmail.com · WhatsApp +86 132 6709 1606, Monday to Saturday, 09:00–18:00 Shenzhen time (GMT+8).