MLCC
General-purpose and high-voltage ceramic capacitors from 0201 to 1812, sourced by the reel with dielectric and tolerance confirmed before shipment.
Catalogue
Seven clusters covering the parts that surround a board: passives, power discretes, general-purpose ICs, interconnect, sensors, PCB and the wire and mechanical work that turns a BOM into a build.
Cluster 01 · 9 categories
Capacitors, inductors, crystals and protection parts — the volume layer of every board.
General-purpose and high-voltage ceramic capacitors from 0201 to 1812, sourced by the reel with dielectric and tolerance confirmed before shipment.
Solid tantalum and polymer tantalum capacitors in A, B, C, D and moulded cases, with ESR and voltage derating specified per line.
Radial, SMD and snap-in aluminium electrolytics from 1 µF to tens of thousands of µF, with lifetime and ripple current checked before quoting.
Metallised polypropylene and polyester film capacitors for DC link, snubber, EMI and pulse duty, quoted by dielectric and dv/dt rating.
Shielded power inductors, moulded SMD types and trans-inductor voltage regulator parts for multiphase CPU and GPU rails.
Common-mode chokes for power and signal lines plus SMD ferrite beads, quoted with impedance at frequency rather than just package size.
SMD and through-hole crystals, ceramic resonators and oscillator modules, quoted with load capacitance and stability tolerance.
Metal-oxide varistors and transient voltage suppressors for surge, ESD and inductive load protection, quoted by clamping voltage and surge rating.
NTC thermistors for temperature sensing and inrush limiting, plus PTC resettable fuses, quoted with beta value and R25 tolerance.
Cluster 02 · 6 categories
MOSFETs, IGBTs, diodes and modules for power conversion, motor drive and charging.
N- and P-channel MOSFETs from 20 V to 900 V in DFN, SO-8, TO-220, TO-247 and D2PAK, with Rds(on) and gate charge quoted together.
Discrete IGBTs and co-packaged diodes from 600 V to 1,700 V for inverters, welding, induction heating and EV charging.
Schottky, ultrafast recovery, standard rectifier and Zener diodes in SMD and through-hole packages, quoted with Vf and recovery time.
Small-signal and power bipolar transistors, digital transistors and matched pairs for analogue and drive circuits.
Single- and three-phase bridge rectifiers from 1 A to 50 A, in DIP, SMD, GBU and metal stud packages.
IGBT and MOSFET modules, IPMs and DC-DC bricks for drives, inverters and telecom supplies — quoted with footprint and driver compatibility.
Cluster 03 · 6 categories
Power management, signal chain, logic, interface, memory and timing — general-purpose, non-controlled parts.
Buck, boost and buck-boost converters, LDOs, chargers, load switches and PMICs for consumer and industrial boards.
General-purpose, precision, low-noise and rail-to-rail op-amps and comparators in single, dual and quad configurations.
74HC/74AHC/74LVC gates, buffers, shift registers, level translators, and 4000-series CMOS logic for legacy and new designs.
RS-485/RS-422 transceivers, RS-232 drivers, CAN and CAN-FD transceivers, plus isolated variants and USB-UART bridges.
Serial EEPROM, SPI NOR flash, SDRAM and eMMC for firmware storage and embedded code — general-purpose parts, not high-end AI memory.
Clock generators, buffers, PLLs, real-time clocks and timing ICs for CPUs, FPGAs, networking and industrial boards.
Cluster 04 · 6 categories
Board-to-board, USB-C, relays, switches, terminal blocks and fuses.
Pin headers, female sockets, box headers, FPC connectors and fine-pitch board-to-board pairs from 0.4 mm to 5.08 mm pitch.
USB-A, micro-USB and USB-C receptacles and plugs, including 16-pin, 24-pin, waterproof and vertical variants.
Signal, power, latching and solid-state relays from 1 A to 30 A, quoted with coil voltage and contact rating together.
Tactile switches, slide switches, toggle and rocker switches, DIP switches and illuminated push buttons.
Pluggable, fixed and spring-cage terminal blocks, plus ring and spade terminals, from 2.54 mm to 10.16 mm pitch.
Cartridge, SMD and radial fuses, thermal fuses and PTC resettable devices, quoted with breaking capacity and time-current curve.
How Interconnect & Electromechanical behaves in the market →
Cluster 05 · 4 categories
Temperature, current, optical and magnetic sensing, plus the modules built around them.
Digital and analogue temperature sensors, thermocouple interfaces and capacitive humidity sensors for HVAC, appliances and industrial control.
Hall-effect and shunt-based current sensors, isolated transducers and voltage sensing modules for motor drive, BMS and power supplies.
Transistor and logic-output optocouplers, high-speed and gate-drive types, plus reflective and through-beam photoelectric sensors.
Hall switches, linear Hall sensors, magnetic encoders and current-sensing Hall ICs for position, speed and proximity detection.
Cluster 06 · 2 categories
Prototype and small-batch boards, copper-clad laminate and aluminium substrates.
1–8 layer prototype and small-batch boards with impedance control, fine line, and assembly coordination through partner factories.
FR-4 copper-clad laminate in standard and high-Tg grades, plus aluminium-backed substrates for LED and power assemblies.
Cluster 07 · 4 categories
FFC/FPC, harnesses, thermal interface material, shielding cans and enclosures.
Flat flexible cable from 0.5 mm to 2.54 mm pitch, plus custom flexible circuits with stiffeners, shielding and fine-pitch terminations.
Crimped harnesses, terminal leads and cable assemblies made to drawing, with connector, wire gauge and test report specified.
Gap pads, thermal grease, phase-change material, adhesive tapes and extruded or die-cast heat sinks for power and LED assemblies.
Board-level shielding cans, EMI gaskets, and custom sheet-metal or die-cast enclosures with finish and grounding specified.
Reading the catalogue
No. It describes the window of parts we can reliably source. Availability, lead time and price are confirmed per line item at quotation, because a Huaqiangbei booth can sell out between a market check and an order.
Often yes, for adjacent general-purpose components. The categories listed are the ones we can describe precisely. If a part falls outside them, send the number anyway — the answer may be "yes, with a longer confirmation" or "no, and here is why".
No. Everything here is general-purpose, non-controlled. Requests for restricted, military or export-licensed parts are declined.
That is the point of the desk. One BOM can span passives, ICs, connectors and a PCB build, and it leaves as one consolidated shipment with one invoice — which is usually cheaper and easier to clear than four separate parcels.
Next step
A BOM, a photo of a reel, or just a model number is enough to start. We reply with availability, price band and the alternatives we can actually verify.