Skip to content

PCB & Substrates

Copper-Clad Laminate & Aluminium Substrates

FR-4 copper-clad laminate in standard and high-Tg grades, plus aluminium-backed substrates for LED and power assemblies.

Specifying CCL / Aluminium Substrate without a costly substitution

Laminate is bought by the panel and specified by Tg, dielectric constant, loss tangent and copper weight. A standard FR-4 panel and a high-Tg panel look the same in a stack and behave differently through reflow: the high-Tg grade resists delamination across multiple passes, which matters for thick boards and lead-free assembly.

We quote FR-4 in 0.2–3.2 mm with 0.5–4 oz copper, in standard and high-Tg grades, and aluminium substrates with the dielectric thickness and thermal conductivity stated. For LED and power assemblies the dielectric layer is the thermal path, so its thickness and conductivity are the specification, not an accessory.

Panel size, copper weight and grade set the price, and thin or heavy-copper panels carry minimum order quantities. If you are prototyping, the practical route is usually to buy through the fabrication service rather than a full panel; we will say which is cheaper at your quantity instead of quoting the larger one.

Typical specifications

Ranges we routinely source in this category. They describe the window, not a single part — the exact value is fixed by the datasheet you specify.

ParameterRange we source
MaterialFR-4 standard, FR-4 high-Tg (≥170 °C), aluminium substrate
Thickness0.2 – 3.2 mm FR-4; 0.8 – 2.0 mm aluminium
Copper weight0.5 – 4 oz (18 – 140 µm)
Panel sizeStandard 1020 × 1220 mm, cut sizes on request
AluminiumThermal conductivity 1 – 3 W/m·K dielectric, 1.0 – 2.0 mm base
GradesFlame retardant, high-Tg, halogen-free on request

Where it is used

Typical applications we quote for. If your use case needs a tighter parameter than the list suggests, say so at quotation — it changes which suppliers are viable.

  • In-house PCB prototyping
  • LED lighting boards
  • Power supply substrates
  • Thick-copper current paths
  • Multi-pass reflow assemblies
Sourcing note. Laminate is quoted by panel and grade. Minimum quantities apply to thin and heavy-copper panels, and cut-to-size charges are quoted separately.

Part numbers on the desk

Specific parts we have looked at recently. Availability is re-confirmed at quotation; the note is what we saw, not a reservation.

Sample data. Sample entries: these rows show the format of the desk while live records are being entered. Availability is illustrative and always re-confirmed at quotation.
Part number Brand Package MOQ Availability
KB-6160 Kingboard FR-4 1.6 mm 1/1 oz 1020×1220 10 sheets Order-in

Questions buyers ask about CCL / Aluminium Substrate

When is high-Tg worth the premium?

Thick boards, multiple reflow passes, and anything that runs hot. For a simple two-layer board assembled once, standard FR-4 is usually fine and we will say so.

Can you cut to size?

Yes, cut panels are quoted by size and quantity. For small quantities the cut charge can exceed the material saving, so we will compare it with buying a full panel.

What does the aluminium substrate specification mean?

The dielectric thickness and its thermal conductivity set the thermal path. Ask for both numbers; a "1 W/m·K" claim without a thickness is not a specification you can design against.

More in PCB & Substrates

Next step

Send the part number. We will check the booths.

One line or a full BOM — the answer comes back per line, with the market position stated rather than implied.