Skip to content

Integrated Circuits

Power Management ICs — PMIC, LDO, DC-DC

Buck, boost and buck-boost converters, LDOs, chargers, load switches and PMICs for consumer and industrial boards.

Specifying PMIC / LDO / DC-DC without a costly substitution

Power ICs are the category where the gap between a genuine part and a re-marked one is most expensive. A counterfeit buck converter may work on the bench and fail at temperature, or quietly miss its current limit and take the load with it. Marking, laser etch depth, package mould and date code are all part of the check we run before a reel is accepted.

We quote by topology, input and output range, current capability, switching frequency, package and pin configuration. For a same-footprint substitute, the pinout must be verified against the datasheet, not assumed from the outline — several popular synchronous bucks share a package while swapping the feedback and enable pins.

Availability splits in two: high-volume consumer regulators are genuinely stocked across the market, while automotive-qualified and high-voltage parts are factory-order. We quote the difference explicitly so a production plan is not built on a stock position that does not exist.

Typical specifications

Ranges we routinely source in this category. They describe the window, not a single part — the exact value is fixed by the datasheet you specify.

ParameterRange we source
TopologiesBuck, boost, buck-boost, LDO, charge pump, load switch
Input range2.5 V – 80 V
Output current100 mA – 30 A (controller plus external FET above that)
PackagesSOT-23-5/6, DFN, QFN, SOP-8, TO-263, BGA
FunctionsCharger, PMIC, sequencer, hot-swap, ideal diode
QualificationIndustrial standard; AEC-Q100 on request

Where it is used

Typical applications we quote for. If your use case needs a tighter parameter than the list suggests, say so at quotation — it changes which suppliers are viable.

  • Point-of-load regulation
  • Battery charging and power path
  • USB PD and Type-C power
  • Industrial 24 V to 5 V conversion
  • Low-noise analogue rails
Sourcing note. Availability, lead time and price are confirmed per line item at quotation. This page describes the range we can source — it is not a stock guarantee.

Part numbers on the desk

Specific parts we have looked at recently. Availability is re-confirmed at quotation; the note is what we saw, not a reservation.

Sample data. Sample entries: these rows show the format of the desk while live records are being entered. Availability is illustrative and always re-confirmed at quotation.
Part number Brand Package MOQ Availability
AMS1117-3.3 AMS SOT-223 LDO 3.3 V 1 A 2,500 pcs Seen in market

Questions buyers ask about PMIC / LDO / DC-DC

How do you check for counterfeit ICs?

Visual marking inspection, package texture, X-ray of lead frame on sampled lines, and a third-party decapsulation test for critical orders. We state which level of check was performed rather than calling a visual inspection a guarantee.

Can you supply the same part in a different package?

Only if the silicon is offered that way by the manufacturer. Package conversion by a third party is not something we quote.

Do you handle controlled or export-restricted parts?

No. We deal in general-purpose, non-controlled components. Requests for restricted, military or export-licensed parts are declined.

Next step

Send the part number. We will check the booths.

One line or a full BOM — the answer comes back per line, with the market position stated rather than implied.