Skip to content

Interconnect & Electromechanical

Fuses & Resettable Fuses

Cartridge, SMD and radial fuses, thermal fuses and PTC resettable devices, quoted with breaking capacity and time-current curve.

Specifying Fuse / PTC without a costly substitution

A fuse is a safety component, and the only specification that matters is whether it interrupts the available fault current. A 1 A fuse with a 35 A breaking capacity in a circuit that can deliver 300 A is not protection — it is a fire risk with a marking on it.

We quote by rated current, voltage, breaking capacity, time-current characteristic (fast, slow-blow, time-lag) and package. For SMD fuses the interrupt rating is often the number omitted from the seller's listing, so we confirm it from the datasheet before quoting.

PTC resettable devices are a different trade: they protect against overcurrent but not against a dead short at full fault current, and they have a trip time that depends on ambient temperature. For a product that must survive a fault, the PTC and the fuse are often both present, and we quote them as a pair when that is the design intent.

Typical specifications

Ranges we routinely source in this category. They describe the window, not a single part — the exact value is fixed by the datasheet you specify.

ParameterRange we source
TypesCartridge, SMD, radial, thermal fuse, PTC resettable
Current50 mA – 30 A
Voltage32 V – 600 V AC/DC
Breaking capacity35 A – 1,500 A, part dependent
CharacteristicsFast-acting, time-lag, slow-blow
Packages0603, 1206, 2410, 5×20 mm, 6.3×32 mm, radial

Where it is used

Typical applications we quote for. If your use case needs a tighter parameter than the list suggests, say so at quotation — it changes which suppliers are viable.

  • Mains input protection
  • Battery pack protection
  • Motor and transformer circuits
  • USB and adapter overcurrent
  • Thermal cut-off in heating products
Sourcing note. Availability, lead time and price are confirmed per line item at quotation. This page describes the range we can source — it is not a stock guarantee.

Part numbers on the desk

Specific parts we have looked at recently. Availability is re-confirmed at quotation; the note is what we saw, not a reservation.

Sample data. Sample entries: these rows show the format of the desk while live records are being entered. Availability is illustrative and always re-confirmed at quotation.
Part number Brand Package MOQ Availability
JK60-050 Jinke PPTC resettable 0.5 A 60 V 2,000 pcs Seen in market

Questions buyers ask about Fuse / PTC

Why does breaking capacity matter?

It is the current the fuse can safely interrupt. Below the available fault current, the fuse may arc and fail to clear. We confirm this figure for every mains-rated line we quote.

Can a PTC replace a fuse?

For limited overcurrent in low-voltage circuits, sometimes. It will not safely clear a full short circuit and it trips slower when hot. We will say which protection each option actually provides.

Are the fuses certified?

Mains-rated fuses are quoted with their approval reference. Unmarked fuses are not offered for mains input protection.

More in Interconnect & Electromechanical

Next step

Send the part number. We will check the booths.

One line or a full BOM — the answer comes back per line, with the market position stated rather than implied.