Skip to content

Interconnect & Electromechanical

Switches & Push Buttons

Tactile switches, slide switches, toggle and rocker switches, DIP switches and illuminated push buttons.

Specifying Switch / Button without a costly substitution

A switch is a feel specification as much as an electrical one: actuation force, travel, tactile curve and audibility define the product experience, while contact rating and bounce define whether the firmware sees one press or five. Both have to be in the quotation.

We quote tactile switches by dimensions, height, actuation force, travel, terminal type and cycle life; slide and toggle parts by contact form and rating. Illuminated buttons add LED colour and voltage, which is a separate electrical interface and a common ordering mistake.

Commodity 6 × 6 mm tactiles are stock items with wide price spread, and the spread usually reflects plating and cycle life rather than anything visible. For a product where the button is pressed daily for years, the higher-grade part is the cheaper decision.

Typical specifications

Ranges we routinely source in this category. They describe the window, not a single part — the exact value is fixed by the datasheet you specify.

ParameterRange we source
TypesTactile, slide, toggle, rocker, DIP, push button, key switch
Ratings50 mA – 10 A; 12 VDC – 250 VAC
Actuation force100 gf – 500 gf (tactile)
Life10,000 – 1,000,000 cycles
TerminalsSMD, through-hole, right angle, with cap or actuator
OptionsIlluminated (LED colour and voltage), sealed, washable

Where it is used

Typical applications we quote for. If your use case needs a tighter parameter than the list suggests, say so at quotation — it changes which suppliers are viable.

  • User interface panels
  • Mode selection and configuration
  • Reset and service buttons
  • DIP configuration on industrial boards
  • Equipment power switching
Sourcing note. Availability, lead time and price are confirmed per line item at quotation. This page describes the range we can source — it is not a stock guarantee.

Part numbers on the desk

Specific parts we have looked at recently. Availability is re-confirmed at quotation; the note is what we saw, not a reservation.

Sample data. Sample entries: these rows show the format of the desk while live records are being entered. Availability is illustrative and always re-confirmed at quotation.
Part number Brand Package MOQ Availability
TS-1187A XKB 5.1×5.1 mm tactile SMD 2,000 pcs Seen in market

Questions buyers ask about Switch / Button

Can you supply samples for feel testing?

Yes — tactile feel is the one thing a datasheet cannot convey. We recommend testing samples before a production order, and we quote them at sample pricing.

What causes double presses?

Contact bounce and worn plating. A part with a longer bounce time can register two events on a fast GPIO interrupt. We quote the bounce specification where the manufacturer publishes it.

Are illuminated buttons a direct swap?

No — LED colour, forward voltage and polarity vary. We quote the LED specification with the switch so the driver circuit can be checked.

More in Interconnect & Electromechanical

Next step

Send the part number. We will check the booths.

One line or a full BOM — the answer comes back per line, with the market position stated rather than implied.