Skip to content

Interconnect & Electromechanical

Terminals & Terminal Blocks

Pluggable, fixed and spring-cage terminal blocks, plus ring and spade terminals, from 2.54 mm to 10.16 mm pitch.

Specifying Terminal Block without a costly substitution

Terminal blocks are chosen by pitch, wire range and the torque the screw can take. A 5.08 mm block rated 300 V with 2.5 mm² wire is a different product from a 3.81 mm block rated 150 V with 1 mm², even when the outlines look interchangeable in a photo.

We quote pluggable and fixed blocks by pitch, pole count, wire gauge, current, voltage and whether the header is closed or open ended. Spring-cage types are quoted separately — they save assembly time but need a specific wire ferrule to hold rated current.

For mains and safety-critical wiring, the certification and the flammability class of the housing matter as much as the electrical rating. We state which standard the block is approved to, and we do not offer unmarked blocks for mains use.

Typical specifications

Ranges we routinely source in this category. They describe the window, not a single part — the exact value is fixed by the datasheet you specify.

ParameterRange we source
Pitch2.54, 3.5, 3.81, 5.0, 5.08, 7.5, 10.16 mm
Wire range0.2 mm² – 6 mm² (24 – 10 AWG)
Current6 A – 32 A per pole
Voltage150 V – 600 V, certification dependent
TypesPluggable, fixed, spring-cage, barrier, DIN rail
OptionsClosed/open ends, locking latches, coding keys, markings

Where it is used

Typical applications we quote for. If your use case needs a tighter parameter than the list suggests, say so at quotation — it changes which suppliers are viable.

  • Field wiring on control panels
  • Power input and output terminals
  • Sensor and actuator connections
  • DIN rail assemblies
  • Equipment retrofit terminations
Sourcing note. Availability, lead time and price are confirmed per line item at quotation. This page describes the range we can source — it is not a stock guarantee.

Part numbers on the desk

Specific parts we have looked at recently. Availability is re-confirmed at quotation; the note is what we saw, not a reservation.

Sample data. Sample entries: these rows show the format of the desk while live records are being entered. Availability is illustrative and always re-confirmed at quotation.
Part number Brand Package MOQ Availability
KF128-5.08-2P Kefa 5.08 mm 2-pin screw terminal 1,000 pcs Seen in market

Questions buyers ask about Terminal Block

Can I mix pluggable headers and plugs from different brands?

Only within the same standard family, and even then the latch geometry may differ. We quote header and plug as a set unless you specify otherwise.

What torque should be used?

The datasheet value, with the specified screwdriver. Over-torquing cracks the housing and under-torquing raises contact resistance — both show up as field failures, not immediate ones.

Do you supply pre-assembled terminal leads?

Yes, through our harness service. Send the wire gauge, length, stripping and terminal type and it is quoted as a made-to-order item.

More in Interconnect & Electromechanical

Next step

Send the part number. We will check the booths.

One line or a full BOM — the answer comes back per line, with the market position stated rather than implied.