Skip to content

Interconnect & Electromechanical

USB & Type-C Connectors

USB-A, micro-USB and USB-C receptacles and plugs, including 16-pin, 24-pin, waterproof and vertical variants.

Specifying USB / Type-C without a costly substitution

USB-C is a mechanically demanding connector: the shell, the tongue and the mid-mount tabs take the entire insertion force. Cheap receptacles fail at the solder joints long before the contacts wear out, and the difference is visible in the shell thickness and the tail design, not in the datasheet.

We quote by pin count, mounting type (SMD, through-hole, hybrid mid-mount), orientation, waterproofing and rated current for the power pins. A 16-pin receptacle cannot carry the same current as a 24-pin part with all VBUS pins populated, and designs that assume otherwise fail at 3 A.

For products where the connector is a user-facing wear item, we recommend specifying a brand with a published mating cycle rating and requesting a sample for drop and insertion testing. The market has plenty of lookalikes; the sample is cheaper than the field return.

Typical specifications

Ranges we routinely source in this category. They describe the window, not a single part — the exact value is fixed by the datasheet you specify.

ParameterRange we source
TypesUSB-A, micro-B, USB-C 16-pin, USB-C 24-pin
MountingSMD, THT, hybrid mid-mount, vertical, right angle
Current1.5 A – 5 A VBUS, part dependent
Mating cycles1,000 – 10,000, series dependent
ExtrasWaterproof IPX7 variants, reinforced shell, locating pegs
PlatingGold flash on contacts; 3 µm gold on premium series

Where it is used

Typical applications we quote for. If your use case needs a tighter parameter than the list suggests, say so at quotation — it changes which suppliers are viable.

  • Charging ports on consumer devices
  • Data interfaces on industrial panels
  • Dock and hub designs
  • Wearable charging contacts
  • Ruggedised field equipment
Sourcing note. Availability, lead time and price are confirmed per line item at quotation. This page describes the range we can source — it is not a stock guarantee.

Part numbers on the desk

Specific parts we have looked at recently. Availability is re-confirmed at quotation; the note is what we saw, not a reservation.

Sample data. Sample entries: these rows show the format of the desk while live records are being entered. Availability is illustrative and always re-confirmed at quotation.
Part number Brand Package MOQ Availability
TYPE-C-31-M-12 HRO 16-pin mid-mount SMD 1,000 pcs Seen in market

Questions buyers ask about USB / Type-C

How do I choose between 16-pin and 24-pin?

By the power and data you need. 16-pin parts typically omit SuperSpeed pairs; if the design needs USB 3.x or higher current, specify 24-pin and confirm all VBUS pins are populated.

Can you supply waterproof Type-C?

Yes, IPX7-rated variants are available, but the seal depends on the housing design as much as the connector. We quote the part and state its rating; we do not claim an enclosure rating for it.

Are the cheap receptacles usable?

For low-cycle internal use, sometimes. For a user-facing port, the shell and tail design decide the lifetime. We will quote a sample so it can be tested before committing a production run.

More in Interconnect & Electromechanical

Next step

Send the part number. We will check the booths.

One line or a full BOM — the answer comes back per line, with the market position stated rather than implied.