Sensors & Modules
Optocouplers & Photoelectric Sensors
Transistor and logic-output optocouplers, high-speed and gate-drive types, plus reflective and through-beam photoelectric sensors.
Typical specifications
Ranges we routinely source in this category. They describe the window, not a single part — the exact value is fixed by the datasheet you specify.
| Parameter | Range we source |
|---|---|
| Types | Transistor output, logic output, high-speed, gate drive, photovoltaic |
| Isolation | 2.5 kV – 5 kV RMS |
| CTR | 20% – 600%, binned |
| Speed | Up to 50 Mbaud (high-speed series) |
| Photoelectric | Reflective, through-beam, slot; 5 mm – 30 m range |
| Packages | DIP-4/6/8, SOP-4/5, wide-body SO-6, M12 housings |
Where it is used
Typical applications we quote for. If your use case needs a tighter parameter than the list suggests, say so at quotation — it changes which suppliers are viable.
- Isolated signal transfer
- IGBT and MOSFET gate drive
- PLC input isolation
- Position and presence detection
- Mains zero-cross detection
Part numbers on the desk
Specific parts we have looked at recently. Availability is re-confirmed at quotation; the note is what we saw, not a reservation.
| Part number | Brand | Package | MOQ | Availability |
|---|---|---|---|---|
| PC817X2NSZ0F | Sharp | DIP-4 phototransistor | 2,000 pcs | Seen in market |
Questions buyers ask about Optocoupler / Photoelectric
Does the CTR bin really matter?
Yes. A circuit designed for a 100% CTR part can fail to switch with a 50% bin at low LED current. We quote the bin, and we flag when only an unlabelled generic part is available.
Can I use a general optocoupler for gate drive?
Not for a switching converter. Gate-drive parts are specified on propagation delay, skew and common-mode transient immunity; a general-purpose part will work on the bench and fail under dv/dt.
Do you supply wide-body parts for mains isolation?
Yes, with the certification reference. The wide-body package is a safety requirement, not a packaging preference.
More in Sensors & Modules
Next step
Send the part number. We will check the booths.
One line or a full BOM — the answer comes back per line, with the market position stated rather than implied.