Skip to content

Sensors & Modules

Temperature & Humidity Sensors

Digital and analogue temperature sensors, thermocouple interfaces and capacitive humidity sensors for HVAC, appliances and industrial control.

Specifying Temp / Humidity without a costly substitution

Digital temperature sensors are quoted by interface, accuracy band and package. The same I²C part can be ±0.5 °C or ±2 °C depending on grade, and a design calibrated for the tight grade will read several degrees off with the loose one. Accuracy over the operating range, not just at 25 °C, is the number to compare.

Humidity sensing adds a second problem: the polymer needs to breathe. A sensor mounted under a conformal coat or next to a heat source will report the enclosure, not the room. We quote the part with its recommended opening and filter accessory where the manufacturer specifies one, because the mechanical design decides whether the reading is usable.

For thermocouple and RTD interfaces we quote the AFE rather than a bare sensor, including cold-junction compensation behaviour and the required isolation if the probe is grounded. Those two details account for most of the accuracy complaints in industrial designs.

Typical specifications

Ranges we routinely source in this category. They describe the window, not a single part — the exact value is fixed by the datasheet you specify.

ParameterRange we source
TypesDigital I²C/SPI, analogue, thermocouple AFE, RTD AFE, thermistor
Range−55 °C to +150 °C; humidity 0 – 100 % RH
Accuracy±0.2 °C to ±2 °C; ±2 % to ±5 % RH
Supply1.8 V – 5.5 V
PackagesSOT-23, DFN, SOIC, TO-92, probe assemblies
ExtrasFilter caps, PTFE membranes, waterproof probe housings

Where it is used

Typical applications we quote for. If your use case needs a tighter parameter than the list suggests, say so at quotation — it changes which suppliers are viable.

  • HVAC and environment monitoring
  • Appliance control
  • Battery thermal monitoring
  • Cold chain data loggers
  • Industrial process sensing
Sourcing note. Availability, lead time and price are confirmed per line item at quotation. This page describes the range we can source — it is not a stock guarantee.

Part numbers on the desk

Specific parts we have looked at recently. Availability is re-confirmed at quotation; the note is what we saw, not a reservation.

Sample data. Sample entries: these rows show the format of the desk while live records are being entered. Availability is illustrative and always re-confirmed at quotation.
Part number Brand Package MOQ Availability
SHT30-DIS Sensirion DFN-8 ±3% RH digital 200 pcs Order-in

Questions buyers ask about Temp / Humidity

Which accuracy grade do I need?

Compare accuracy across the range you operate in, not just at room temperature. We quote the grade explicitly; a ±2 °C part is not a substitute for a ±0.5 °C one in a control loop.

Can you supply humidity sensors with filters?

Yes, and we recommend them where dust or condensation is expected. The filter is often a separate line item from the sensor, so it is quoted separately rather than assumed.

Do you supply calibrated probes?

Probe assemblies are quoted as made-to-order with the cable and housing specified. Calibration certificates come from a partner lab and are quoted as a separate service.

Next step

Send the part number. We will check the booths.

One line or a full BOM — the answer comes back per line, with the market position stated rather than implied.