Skip to content

Wire, Thermal & Mechanical

Shielding Cans & Enclosures

Board-level shielding cans, EMI gaskets, and custom sheet-metal or die-cast enclosures with finish and grounding specified.

Specifying Shielding / Enclosure without a costly substitution

A shield is a mechanical part with an electromagnetic job, and it only works if it is bonded. A can that sits on the board without a proper ground ring, or with a gap where a cable exits, can make emissions worse by forming a slot antenna. The drawing has to define the fence, the clip pitch, the aperture plan and the grounding points.

We quote shielding cans by footprint, height, material and clip style, and EMI gaskets by compression force and shielding effectiveness. Custom enclosures are quoted from a 3D file with material, thickness, finish and grounding studs, through partner sheet-metal and die-cast shops.

Prototype quantities are usually laser-cut and formed, which avoids tooling but costs more per part. Production volumes move to a stamping or die-cast tool, and that is where the tooling cost and lead time belong in the quote — not in a later revision.

Typical specifications

Ranges we routinely source in this category. They describe the window, not a single part — the exact value is fixed by the datasheet you specify.

ParameterRange we source
CansTin-plated steel, stainless, brass; 0.1 – 0.3 mm
Clip stylesSolder tab, press-fit, removable lid, fence and cover
GasketsConductive foam, fabric-over-foam, silicone; 20 – 60 dB
EnclosuresSheet steel, aluminium, die-cast; IP-rated on request
FinishZinc, nickel, powder coat, anodised
ExtrasVent patterns, cable glands, grounding studs, silkscreen

Where it is used

Typical applications we quote for. If your use case needs a tighter parameter than the list suggests, say so at quotation — it changes which suppliers are viable.

  • RF and wireless module shielding
  • Power supply EMI containment
  • Industrial control enclosures
  • Cable exit gasketing
  • Prototype chassis
Sourcing note. Shields and enclosures are made to drawing. Tooling and sample approval govern the timeline; the material options above describe capability, not stock.

Part numbers on the desk

Specific parts we have looked at recently. Availability is re-confirmed at quotation; the note is what we saw, not a reservation.

Sample data. Sample entries: these rows show the format of the desk while live records are being entered. Availability is illustrative and always re-confirmed at quotation.
Part number Brand Package MOQ Availability
SH-CU-20x15x3 Generic Two-piece shield 20×15×3 mm 500 pcs Seen in market

Questions buyers ask about Shielding / Enclosure

Can you make a shield from my board outline?

Yes, from a 3D file or a drawing with the fence path, height and clip positions. Apertures and cable exits must be in the drawing — a shield designed around a solid lid rarely fits the real assembly.

Do you supply prototype enclosures?

Yes, laser-cut and formed without tooling. Unit cost is higher, but it avoids a tooling commitment before the design is frozen.

Is shielding effectiveness guaranteed?

No. The achievable figure depends on the apertures, the grounding and the cable routing. We quote the material and its rated attenuation; the assembled result has to be measured.

More in Wire, Thermal & Mechanical

Next step

Send the part number. We will check the booths.

One line or a full BOM — the answer comes back per line, with the market position stated rather than implied.