Skip to content

Sensors & Modules

Hall & Magnetic Sensors

Hall switches, linear Hall sensors, magnetic encoders and current-sensing Hall ICs for position, speed and proximity detection.

Specifying Hall Sensor without a costly substitution

Hall sensors are chosen by what they must reject as much as what they must detect: the operate and release points, the hysteresis, and the temperature drift of both. A switch with a narrow hysteresis will chatter on a slow-moving magnet, and a linear part with uncompensated drift will read a different angle after the enclosure warms up.

We quote switches by supply range, output type, operate/release points and package; linear parts by sensitivity, rail-to-rail behaviour and drift. Magnetic encoders are quoted with the pole-pair count and the air gap the design assumes, because both decide whether the angle output is usable.

For motor commutation, the placement of the sensors is as important as the part. We supply the sensor and can quote matched sets from one lot, but we do not claim a commutation result that depends on the mechanical assembly.

Typical specifications

Ranges we routinely source in this category. They describe the window, not a single part — the exact value is fixed by the datasheet you specify.

ParameterRange we source
TypesUnipolar/bipolar/omnipolar switch, linear, encoder, current-sense Hall
Supply1.8 V – 24 V
OutputOpen-drain, push-pull, analogue, PWM, SPI
Sensitivity1 mV/G – 20 mV/G (linear)
BandwidthUp to 100 kHz
PackagesSOT-23, TO-92, DFN, SIP-3

Where it is used

Typical applications we quote for. If your use case needs a tighter parameter than the list suggests, say so at quotation — it changes which suppliers are viable.

  • BLDC motor commutation
  • Position and end-stop detection
  • Rotary encoders
  • Door and lid sensing
  • Non-contact current measurement
Sourcing note. Availability, lead time and price are confirmed per line item at quotation. This page describes the range we can source — it is not a stock guarantee.

Part numbers on the desk

Specific parts we have looked at recently. Availability is re-confirmed at quotation; the note is what we saw, not a reservation.

Sample data. Sample entries: these rows show the format of the desk while live records are being entered. Availability is illustrative and always re-confirmed at quotation.
Part number Brand Package MOQ Availability
SS49E Honeywell TO-92 linear Hall 1,000 pcs Seen in market

Questions buyers ask about Hall Sensor

Bipolar or unipolar switch?

It depends on the magnet arrangement. A unipolar part needs a defined south or north field and releases near zero; a bipolar part latches with alternating poles. Send the magnet and gap and we will quote the right family.

Do you supply matched sets for three-phase commutation?

Yes, from one lot where quantity allows. Sensor matching reduces commutation jitter, though the mechanical placement still dominates the result.

Are automotive-grade Hall parts available?

AEC-Q100 series exist and are quoted per line against the approved list. Expect a longer confirmation and no same-day stock answer.

Next step

Send the part number. We will check the booths.

One line or a full BOM — the answer comes back per line, with the market position stated rather than implied.