Skip to content

Wire, Thermal & Mechanical

FFC / FPC Ribbon & Flexible Circuits

Flat flexible cable from 0.5 mm to 2.54 mm pitch, plus custom flexible circuits with stiffeners, shielding and fine-pitch terminations.

Specifying FFC / FPC without a costly substitution

Flat cable is specified by pitch, conductor count, length, orientation of the contacts at each end and whether the contacts are on the same side or opposite sides. Those last two details are the ones that turn a correct-looking part into a connector that will not seat, and they are almost never in the headline description.

We supply standard FFC by pitch and pin count with reinforced ends, and custom FPC to drawing with stiffeners, gold plating, shielding layers and fine-pitch ZIF terminations. For custom circuits the drawing, layer stack and bend radius are the quote inputs; a flexible circuit asked to bend tighter than its stack allows will crack its conductors in the field.

Standard FFC in common pitches is genuinely available from the market and ships quickly. Custom FPC is a tooling and production item: expect a sample approval step and a production lead time, both quoted with the part rather than after the order.

Typical specifications

Ranges we routinely source in this category. They describe the window, not a single part — the exact value is fixed by the datasheet you specify.

ParameterRange we source
Pitch0.5, 0.8, 1.0, 1.25, 1.5, 2.0, 2.54 mm
Conductors2 – 80
Length20 mm – 500 mm standard; longer on request
ContactsSame side / opposite side, A/B type, reinforced ends
FPC stack1 – 4 layers, polyimide, stiffener options
OptionsEMI shielding, gold plating, 90° bends, slits, adhesive backing

Where it is used

Typical applications we quote for. If your use case needs a tighter parameter than the list suggests, say so at quotation — it changes which suppliers are viable.

  • Display and touch panel connections
  • Camera module flex
  • Board-to-board in tight enclosures
  • Sensor and keypad flex
  • Wearable internal wiring
Sourcing note. Availability, lead time and price are confirmed per line item at quotation. This page describes the range we can source — it is not a stock guarantee.

Part numbers on the desk

Specific parts we have looked at recently. Availability is re-confirmed at quotation; the note is what we saw, not a reservation.

Sample data. Sample entries: these rows show the format of the desk while live records are being entered. Availability is illustrative and always re-confirmed at quotation.
Part number Brand Package MOQ Availability
FFC-0.5-30P-100-A Generic 0.5 mm 30-pin, type A, 100 mm 200 pcs Seen in market

Questions buyers ask about FFC / FPC

Same-side or opposite-side contacts?

It depends on the mating connector and how the cable is folded. Send the connector part number or a photo of the assembly; this is the single most common ordering error in FFC.

Can you make a custom FPC?

Yes, from a drawing with stack-up, bend radius and termination specified. A sample approval step is required before production, and it is quoted as part of the job rather than billed later.

What bend radius is safe?

It depends on the stack and copper thickness — a single-layer flex bends tighter than a four-layer one. State the radius in the drawing; we will flag a design that asks for more than the stack allows.

Next step

Send the part number. We will check the booths.

One line or a full BOM — the answer comes back per line, with the market position stated rather than implied.