Skip to content

Power & Discrete

Bipolar Transistors

Small-signal and power bipolar transistors, digital transistors and matched pairs for analogue and drive circuits.

Specifying BJT without a costly substitution

Bipolars still win where noise, linearity or cost matter more than efficiency: signal amplification, current mirrors, linear regulators, and the base drive of larger devices. The parameters that matter are hFE at the actual collector current, Vce(sat) at the drive level, and the transition frequency for anything switching.

We quote small-signal parts by hFE bin, because an unbinned 2N3904 and a binned one are different purchasing lines even though the marking looks similar. Power bipolars are quoted with SOA and thermal resistance, which is where parallel operation succeeds or fails.

Darlington and digital transistors with built-in bias resistors are common in interface and relay drive circuits. Those are commodity parts with real stock, and the main risk is the resistor values inside the package, which differ between seemingly identical type numbers.

Typical specifications

Ranges we routinely source in this category. They describe the window, not a single part — the exact value is fixed by the datasheet you specify.

ParameterRange we source
TypesNPN, PNP, complementary pairs, Darlington, digital (RET)
Vceo20 V – 400 V
Current10 mA – 15 A
PackagesSOT-23, SOT-223, TO-92, TO-126, TO-220, TO-3P
Key parametershFE bin, Vce(sat), ft, SOA, Rth
MatchinghFE-matched pairs available for current mirrors

Where it is used

Typical applications we quote for. If your use case needs a tighter parameter than the list suggests, say so at quotation — it changes which suppliers are viable.

  • Small-signal amplification
  • Relay and LED drive
  • Linear regulator pass elements
  • Current sources and mirrors
  • Gate drive buffers
Sourcing note. Availability, lead time and price are confirmed per line item at quotation. This page describes the range we can source — it is not a stock guarantee.

Part numbers on the desk

Specific parts we have looked at recently. Availability is re-confirmed at quotation; the note is what we saw, not a reservation.

Sample data. Sample entries: these rows show the format of the desk while live records are being entered. Availability is illustrative and always re-confirmed at quotation.
Part number Brand Package MOQ Availability
MMBT3904 onsemi SOT-23 NPN 40 V 3,000 pcs Seen in market

Questions buyers ask about BJT

Do you supply binned hFE parts?

Yes, where the manufacturer publishes bins. Unbinned generic parts are quoted as such — the difference matters in current mirrors and low-distortion stages.

Can you match NPN/PNP pairs?

Yes for complementary pairs used in output stages. We check the hFE bin on both sides rather than assuming the pair is symmetric.

Are digital transistors interchangeable?

Only if the internal resistor values match. Two RETs with the same outline can have 10 kΩ versus 47 kΩ bias and behave completely differently.

More in Power & Discrete

Next step

Send the part number. We will check the booths.

One line or a full BOM — the answer comes back per line, with the market position stated rather than implied.