Skip to content

Power & Discrete

Power Modules

IGBT and MOSFET modules, IPMs and DC-DC bricks for drives, inverters and telecom supplies — quoted with footprint and driver compatibility.

Specifying Power Module without a costly substitution

A module is a system decision: the footprint fixes the busbar geometry, the gate driver must match the internal gate resistance, and the thermal stack must match the baseplate. Buying on price alone is how a replacement module ends up derating a drive to 70% of its nameplate.

We source IGBT modules (six-pack, PIM, half-bridge), intelligent power modules with integrated drivers, and DC-DC bricks for telecom and industrial rails. Every line is quoted with the exact part suffix, because the same family often spans multiple voltage and current classes with identical outlines.

Stock positions in this category are shallow and move quickly with drive and inverter production. For repair demand, the market usually has the original module; for new builds, the factory lead time is the real date. We quote both and say which one you are looking at.

Typical specifications

Ranges we routinely source in this category. They describe the window, not a single part — the exact value is fixed by the datasheet you specify.

ParameterRange we source
TypesIGBT six-pack, PIM, half-bridge, IPM, DC-DC brick
Voltage600 V – 1,700 V (IGBT); 24 V – 400 V (bricks)
Current10 A – 600 A module dependent
PackagesEconoPIM, 62 mm, MiniSKiiP-style, brick footprints
Key parametersVce(sat), Rth(j-c), isolation voltage, gate charge
SupportDatasheet and pinout confirmation before order

Where it is used

Typical applications we quote for. If your use case needs a tighter parameter than the list suggests, say so at quotation — it changes which suppliers are viable.

  • Motor drives and servo amplifiers
  • Solar and energy storage inverters
  • UPS and telecom rectifiers
  • EV charging power stages
  • Industrial welding
Sourcing note. Availability, lead time and price are confirmed per line item at quotation. This page describes the range we can source — it is not a stock guarantee.

Questions buyers ask about Power Module

Can you confirm a module is pin-compatible?

We confirm the exact suffix and provide the datasheet pinout. Outline compatibility alone is not enough — internal gate resistance and sense-terminal arrangement differ within a family.

Do you supply used or pulled modules?

No. Repair-grade pulled modules are not quoted; the failure mode of a used module is exactly what you were trying to fix.

What lead time should I plan for?

For market-available lines, days to a couple of weeks. For factory-order modules, the production slot governs. We quote the two separately so a production plan is not built on the optimistic one.

More in Power & Discrete

Next step

Send the part number. We will check the booths.

One line or a full BOM — the answer comes back per line, with the market position stated rather than implied.