Skip to content

Power & Discrete

MOSFETs

N- and P-channel MOSFETs from 20 V to 900 V in DFN, SO-8, TO-220, TO-247 and D2PAK, with Rds(on) and gate charge quoted together.

Specifying MOSFET without a costly substitution

A MOSFET is chosen on a trade-off curve, not a single number. Low Rds(on) usually means large die and high gate charge, which costs switching loss and driver current. The right part depends on switching frequency, gate driver strength and thermal path — which is why a "better" MOSFET with half the Rds(on) can make a converter run hotter.

We quote by voltage class, package, Rds(on) at the specified Vgs, Qg, and the safe operating area. For high-volume consumer boards the market holds genuine stock across the common 30 V and 60 V families. Above 200 V, and for automotive-qualified parts, availability narrows and brand verification matters more than price.

Counterfeit power devices are a real risk in this market: re-marked parts with a smaller die inside are common enough that we inspect marking, package texture and date code before any high-current order ships. For critical lines we can arrange third-party decapsulation testing on request, quoted as a separate cost.

Typical specifications

Ranges we routinely source in this category. They describe the window, not a single part — the exact value is fixed by the datasheet you specify.

ParameterRange we source
Vds20 V – 900 V
Current1 A – 300 A (package and thermal limited)
Rds(on)From below 1 mΩ on high-current DFN and TO-leaded parts
PackagesSOT-23, SO-8, DFN 3×3 / 5×6, D2PAK, TO-220, TO-247, TOLL
ChannelN-channel and P-channel; complementary pairs
QualificationIndustrial standard; AEC-Q101 series on request

Where it is used

Typical applications we quote for. If your use case needs a tighter parameter than the list suggests, say so at quotation — it changes which suppliers are viable.

  • Switch-mode power supplies
  • Motor drive and BLDC control
  • Battery protection and load switching
  • Synchronous rectification
  • LED and charger circuits
Sourcing note. Availability, lead time and price are confirmed per line item at quotation. This page describes the range we can source — it is not a stock guarantee.

Part numbers on the desk

Specific parts we have looked at recently. Availability is re-confirmed at quotation; the note is what we saw, not a reservation.

Sample data. Sample entries: these rows show the format of the desk while live records are being entered. Availability is illustrative and always re-confirmed at quotation.
Part number Brand Package MOQ Availability
AO3400A Alpha & Omega SOT-23 N-ch 30 V 5.7 A 3,000 pcs Seen in market

Questions buyers ask about MOSFET

How do you verify a power MOSFET is genuine?

Marking, package mould texture, lead finish and date code are checked on receipt, and sampled lines can go to a third-party lab for decapsulation. We will not present a visual check as a guarantee — if the order is critical, budget for the lab test.

Can you supply matched pairs for synchronous stages?

Yes, from the same date code where possible. Mixing lots in a half-bridge is a reliability risk we would rather avoid.

What if the exact part is not available?

We propose the nearest equivalent with the differences in Rds(on), Qg and SOA stated, and we do not ship a substitute without written approval.

More in Power & Discrete

Next step

Send the part number. We will check the booths.

One line or a full BOM — the answer comes back per line, with the market position stated rather than implied.