Power & Discrete
Diodes — Schottky, Fast Recovery & Rectifier
Schottky, ultrafast recovery, standard rectifier and Zener diodes in SMD and through-hole packages, quoted with Vf and recovery time.
Typical specifications
Ranges we routinely source in this category. They describe the window, not a single part — the exact value is fixed by the datasheet you specify.
| Parameter | Range we source |
|---|---|
| Types | Schottky, ultrafast, standard, Zener, small-signal switching |
| Vrrm | 20 V – 1,600 V |
| Current | 100 mA – 100 A |
| Packages | SOD-123, SMA/SMB/SMC, TO-220, TO-247, DO-41/DO-201, stud mount |
| Key parameters | Vf, Ir, trr, Vz tolerance, Rth(j-c) |
| Arrays | Common-cathode and common-anode duals available |
Where it is used
Typical applications we quote for. If your use case needs a tighter parameter than the list suggests, say so at quotation — it changes which suppliers are viable.
- Buck and boost converters
- Freewheeling and clamp duty
- Reverse polarity protection
- Rectifier bridges in power supplies
- Signal clamping and reference
Part numbers on the desk
Specific parts we have looked at recently. Availability is re-confirmed at quotation; the note is what we saw, not a reservation.
| Part number | Brand | Package | MOQ | Availability |
|---|---|---|---|---|
| SS34 | MDD | SMA 40 V 3 A Schottky | 5,000 pcs | Seen in market |
Questions buyers ask about Diode
Can a Schottky replace a fast recovery diode?
Only below its voltage limit and after checking reverse leakage at temperature. Above roughly 100 V the leakage becomes a real thermal problem, and we will say so rather than fill the line.
Do you quote dual diodes as matched pairs?
Yes, common-cathode and common-anode duals from the same lot where the quantity allows.
Are Zener tolerances exact?
Bins are ±1%, ±2% and ±5%. Tell us which bin the design assumes, because a 5% part in a 1% position shifts the clamp voltage.
More in Power & Discrete
Next step
Send the part number. We will check the booths.
One line or a full BOM — the answer comes back per line, with the market position stated rather than implied.