Skip to content

Passives

Film Capacitors

Metallised polypropylene and polyester film capacitors for DC link, snubber, EMI and pulse duty, quoted by dielectric and dv/dt rating.

Specifying Film without a costly substitution

Film capacitors are specified where stability and self-healing matter: DC-link smoothing in inverters, snubbers across switching devices, and EMI filtering on mains inputs. The dielectric decides the behaviour — polypropylene for low loss and high pulse current, polyester for volumetric efficiency at lower cost — and the two are not interchangeable in a snubber.

We quote film parts by construction: dielectric, rated DC and AC voltage, capacitance tolerance, dv/dt or pulse current, and package style (box, axial, radial, screw). Safety-rated X1/X2 and Y-class parts for mains filtering are quoted with the certification class stated explicitly, because a mains filter built on a non-rated part is a compliance failure, not a cost saving.

DC-link film capacitors for inverters are a project purchase rather than a shelf item: large can types with specific busbar geometry are made to order, and the lead time follows the factory, not the market. We will say which lines are available now and which need a production slot.

Typical specifications

Ranges we routinely source in this category. They describe the window, not a single part — the exact value is fixed by the datasheet you specify.

ParameterRange we source
DielectricsMetallised polypropylene (MKP), polyester (MKT), mixed
Capacitance1 nF – 200 µF
Voltage63 V – 3,000 V DC; AC ratings per series
ConstructionRadial box, axial, screw terminal, DC-link can
Safety classesX1/X2 across-the-line, Y1/Y2 line-to-ground where certified
Key parametersdv/dt, pulse current, ESR, self-inductance

Where it is used

Typical applications we quote for. If your use case needs a tighter parameter than the list suggests, say so at quotation — it changes which suppliers are viable.

  • Inverter DC link
  • Switching snubbers
  • Mains EMI filtering
  • Motor run and power factor correction
  • Pulse and discharge circuits
Sourcing note. Availability, lead time and price are confirmed per line item at quotation. This page describes the range we can source — it is not a stock guarantee.

Part numbers on the desk

Specific parts we have looked at recently. Availability is re-confirmed at quotation; the note is what we saw, not a reservation.

Sample data. Sample entries: these rows show the format of the desk while live records are being entered. Availability is illustrative and always re-confirmed at quotation.
Part number Brand Package MOQ Availability
B32922C3104K TDK EPCOS X2 100 nF 305 V 1,000 pcs Order-in

Questions buyers ask about Film

Can a polyester part replace polypropylene?

Sometimes for plain coupling, almost never for a snubber or DC link. Losses and pulse capability differ by an order of magnitude. We will only propose it with the difference stated in writing.

Are the X2 parts certified?

We quote certified series and state the class and file reference. If a line is unmarked or the certificate cannot be produced, we do not offer it for mains use.

What is the lead time on large DC-link cans?

Typically a production slot rather than stock. Send the busbar drawing and capacitance with tolerance; the factory quote, not our shelf, sets the date.

Next step

Send the part number. We will check the booths.

One line or a full BOM — the answer comes back per line, with the market position stated rather than implied.