Skip to content

Passives

Thermistors & NTC

NTC thermistors for temperature sensing and inrush limiting, plus PTC resettable fuses, quoted with beta value and R25 tolerance.

Specifying Thermistor / NTC without a costly substitution

An NTC is defined by three numbers that must travel together: resistance at 25 °C, beta value, and tolerance. A 10 kΩ part with B = 3435 and one with B = 3950 will read differently by several degrees at the ends of the range, and a control loop calibrated for one will misbehave on the other.

For temperature sensing we quote glass-bead, SMD and epoxy-coated types with their beta and tolerance, and for inrush limiting the power NTCs where the steady-state current and thermal capacity decide the size. Power NTCs run hot by design; a smaller disc that "fits" will crack under repeated inrush cycles.

PTC resettable fuses are usually specified alongside: hold current, trip current and maximum voltage. We quote them together with the NTC when the application is a power input, because the two are chosen as one protection scheme and separating them is how a design ends up tripping on every cold start.

Typical specifications

Ranges we routinely source in this category. They describe the window, not a single part — the exact value is fixed by the datasheet you specify.

ParameterRange we source
R25 range1 Ω – 1 MΩ
Beta (B25/85)3,000 K – 4,500 K
Tolerance±1%, ±2%, ±3%, ±5% on R25
TypesGlass bead, SMD, epoxy coated, power/inrush, PTC resettable
Operating range−40 °C to +150 °C, series dependent
Key parametersB value, R25, dissipation constant, thermal time constant

Where it is used

Typical applications we quote for. If your use case needs a tighter parameter than the list suggests, say so at quotation — it changes which suppliers are viable.

  • Battery and board temperature sensing
  • Inrush current limiting
  • Motor and transformer overload protection
  • Thermostat and fan control
  • Charger thermal cut-off
Sourcing note. Availability, lead time and price are confirmed per line item at quotation. This page describes the range we can source — it is not a stock guarantee.

Part numbers on the desk

Specific parts we have looked at recently. Availability is re-confirmed at quotation; the note is what we saw, not a reservation.

Sample data. Sample entries: these rows show the format of the desk while live records are being entered. Availability is illustrative and always re-confirmed at quotation.
Part number Brand Package MOQ Availability
NTCG103JF103FT1 TDK 0402 10 kΩ ±1% B=3380 10,000 pcs Seen in market

Questions buyers ask about Thermistor / NTC

Can you match beta value exactly?

For common values yes; for narrow bins we quote what is verifiable and state the actual beta on the packing list. Swapping beta for a cheaper bin is a calibration change, not a purchasing one.

Do you supply matched pairs for sensing?

On request. If two channels must track, matched tolerance bins are worth the small premium; we will quote both options.

Are power NTCs available in small quantities?

Yes, though the market is thinner than for sensing parts. Confirm the steady-state current so the disc size is right before ordering samples.

Next step

Send the part number. We will check the booths.

One line or a full BOM — the answer comes back per line, with the market position stated rather than implied.