Skip to content

Passives

Power Inductors & TLVR

Shielded power inductors, moulded SMD types and trans-inductor voltage regulator parts for multiphase CPU and GPU rails.

Specifying Power Inductor / TLVR without a costly substitution

Power inductors fail quietly on paper and loudly in the lab. Saturation current, temperature rise current and DCR interact: a part that saturates just below the peak current of a multiphase stage will still look fine in a light-load bench test. The datasheet numbers are measured under conditions that rarely match the actual board, so the temperature rise at your operating point is the number worth arguing about.

We source shielded and moulded SMD inductors from 0.1 µH to several hundred µH, plus the coupled and TLVR parts used around CPU and GPU VRMs. TLVR in particular is a narrow market: the parts are tied to specific controller platforms, availability moves in waves, and substituting one without checking the transient response is how a stable rail becomes a marginal one.

For switching regulators below a few amps, the choice is usually a commodity and the price is real. Above that, expect to confirm saturation current at temperature, the shielding type, and whether the part is AEC-qualified if the board is automotive.

Typical specifications

Ranges we routinely source in this category. They describe the window, not a single part — the exact value is fixed by the datasheet you specify.

ParameterRange we source
Inductance0.1 µH – 1 mH
Current0.5 A – 80 A saturation, series dependent
TypesShielded drum, moulded SMD, coupled, TLVR
DCRFrom below 1 mΩ on high-current moulded parts
ShieldingMagnetically shielded standard; unshielded on request
Key parametersIsat, Irms, DCR, temperature rise, SRF

Where it is used

Typical applications we quote for. If your use case needs a tighter parameter than the list suggests, say so at quotation — it changes which suppliers are viable.

  • Buck and boost converters
  • Multiphase CPU/GPU VRM
  • Point-of-load modules
  • LED drivers
  • Battery charger stages
Sourcing note. Availability, lead time and price are confirmed per line item at quotation. This page describes the range we can source — it is not a stock guarantee.

Part numbers on the desk

Specific parts we have looked at recently. Availability is re-confirmed at quotation; the note is what we saw, not a reservation.

Sample data. Sample entries: these rows show the format of the desk while live records are being entered. Availability is illustrative and always re-confirmed at quotation.
Part number Brand Package MOQ Availability
SRN4018-100M Bourns 4×4 mm 10 µH shielded 1,000 pcs Seen in market

Questions buyers ask about Power Inductor / TLVR

Do you stock TLVR parts?

Rarely as shelf stock. TLVR availability moves with platform ramps, so we check the market per request and quote what can be verified. Send the controller and target transient spec with the enquiry.

Saturation current at what temperature?

Ask for the curve, not the headline number. We quote the datasheet Isat with its test condition and flag parts where only a 25 °C figure is published.

Can you supply custom inductance values?

For moulded SMD families some values are factory-order only. We will tell you which values are market-available and which need a production order.

Next step

Send the part number. We will check the booths.

One line or a full BOM — the answer comes back per line, with the market position stated rather than implied.