Skip to content

Passives

MLCC — Multilayer Ceramic Capacitors

General-purpose and high-voltage ceramic capacitors from 0201 to 1812, sourced by the reel with dielectric and tolerance confirmed before shipment.

Specifying MLCC without a costly substitution

MLCC is the highest-volume part on almost every board and the easiest place to lose money on a bad substitution. The same 100 nF 0402 exists in X5R, X7R, X7S and Y5V dielectrics with voltage ratings from 6.3 V to 100 V, and the cheaper dielectric loses most of its capacitance under bias. When a quote looks unusually low, the dielectric or the voltage rating is usually the reason.

We quote MLCC by the full specification — case size, capacitance, tolerance, voltage, dielectric and termination — and we do not accept a "same value" swap without written approval. Reels arrive with date code and lot visible; cut tape is only shipped when you ask for it, because a partial reel is where mixed-date material enters an order.

For automotive and industrial builds, AEC-Q200 and high-temperature series are available but thinner in the market. Those lines are checked against the approved vendor list first, then price and lead time are quoted per line. Expect a longer confirmation window than consumer-grade parts.

Typical specifications

Ranges we routinely source in this category. They describe the window, not a single part — the exact value is fixed by the datasheet you specify.

ParameterRange we source
Case sizes0201, 0402, 0603, 0805, 1206, 1210, 1812
Capacitance range0.5 pF – 100 µF (value dependent on case and voltage)
DielectricsC0G/NP0, X7R, X5R, X7S, Y5V, high-voltage series
Voltage ratings6.3 V – 1 kV
Tolerance±0.1 pF to ±20% (dielectric dependent)
TerminationStandard Ni/Sn, soft termination, automotive-grade on request

Where it is used

Typical applications we quote for. If your use case needs a tighter parameter than the list suggests, say so at quotation — it changes which suppliers are viable.

  • Decoupling and bulk bypass
  • EMI filtering on interfaces
  • Snubber and resonant circuits
  • Timing and oscillator loads
  • High-voltage isolation barriers
Sourcing note. Availability, lead time and price are confirmed per line item at quotation. This page describes the range we can source — it is not a stock guarantee.

Part numbers on the desk

Specific parts we have looked at recently. Availability is re-confirmed at quotation; the note is what we saw, not a reservation.

Sample data. Sample entries: these rows show the format of the desk while live records are being entered. Availability is illustrative and always re-confirmed at quotation.
Part number Brand Package MOQ Availability
CC0603KRX7R9BB104 Yageo 0603 X7R 100 nF 50 V 1 reel (4,000) Seen in market
CL10B104KB8NNNC Samsung 0603 X7R 100 nF 50 V 1 reel (4,000) Seen in market
GRM155R71C104KA88D Murata 0402 X7R 100 nF 16 V 1 reel (10,000) Seen in market

Questions buyers ask about MLCC

Do you supply partial reels?

Only when requested. Cut tape and partial reels are quoted separately with the remaining quantity stated, because mixed-date material is the most common source of incoming inspection failures.

Can you match a specific brand?

Yes — tell us the manufacturer and the exact series. If that series is not available in the window you need, we will propose an equivalent from the approved list and mark it clearly as an alternative rather than shipping it silently.

How do you handle high-voltage parts?

Above 100 V the market is much thinner, so we confirm dielectric, voltage derating and package before quoting. Allow extra days for confirmation; these are rarely sitting on a shelf in the exact value you need.

Next step

Send the part number. We will check the booths.

One line or a full BOM — the answer comes back per line, with the market position stated rather than implied.